Off-Grid Solar Inverter
SMART VMH Series 5KW
Introduction:
The SMART VMH series is an integrated control machine of pure sine wave high-frequency solar inverter. The controller adopts advanced MPPT calculation method and intelligent battery management to ensure the maximum energy acquisition. With a wide PV input range, the inverter can be carried without battery when the energy is sufficient. It has the advantages of high-power density, simple operation, high overall efficiency, and small no-load loss. The inverter integrates the 3-in-1 function of solar energy, mains power and battery, which can be used for lighting, computers, televisions and other household appliances and electric tools, as well as small-scale
industrial electrical equipment.
Feature:
• Pure sine wave output
• 450V wide PV circuit voltage can work for the load without battery connected (when the energy is sufficient)
• Built in MPPT solar controller
• Configurable AC/Solar input priority and output priority via LCD settings.
• Wide and selectable AC input voltage range
• Multiple protections of battery over discharge, overload, over temperature, short circuit
• Automatically turn on after the mains is restored.
• Cold start function
• USB and RS232 monitoring functions
Specifications:
| MODEL |
Smart VMH 3024 |
Smart VMH 3048 |
Smart VMH 5048 |
| Rated Capacity |
3000VA/3000W |
5000VA/5000W |
| INPUT |
|
| Input Format |
L+N+PE |
| Rated Input Voltage |
208/220/230/240VAC |
| Voltage Range |
170~280VAC(For Personal Computers); 90~280VAC(For Home Appliances) |
| Frequency Range |
50Hz/60Hz(Auto Sensing) |
| OUTPUT |
|
| Output Format |
L+N+PE |
| Rated Output Voltage |
208/220/230/240VAC±5% |
| Output Frequency |
50/60Hz±0.1% |
| Waveform |
Pure Sine Wave |
| Transfer Time |
10ms(For Personal Computers),10ms(For Home Appliances) |
| Peak Power |
6000VA |
6000VA |
10000VA |
| Overload Capacity |
Battery Mode: 1min@102%~110% Load 10s@110%~130%Load
3s@130%~150% Load 200ms@>150% Load |
| Peak Efficiency (Battery Mode) |
>93% |
>94% |
>94% |
| BATTERY |
|
| Rated Voltage |
24 VDC |
48 VDC |
48 VDC |
| Constant Charging Voltage (Can Be Set) |
28.2 VDC |
56.4 VDC |
56.4 VDC |
| Float Charging Voltage (Can Be Set) |
27 VDC |
54 VDC |
54 VDC |
| SOLAR CHARGER & AC CHARGER |
|
| Solar Charger Type |
MPPT |
MPPT |
MPPT |
| PV Maximum Input Power |
4000W |
4000W |
5500W |
| MPPT Tracking Range |
120~430 VDC |
120~430 VDC |
120~430 VDC |
| Maximum PV Input Voltage |
450 VDC |
450 VDC |
450 VDC |
| Maximum PV Charge Current |
80 A |
80 A |
80 A |
| Maximum Mains Charging Current |
60 A |
60 A |
80 A |
| Maximum Charging Current |
80 A |
80 A |
80 A |
| COMMUNICATION INTERFACE |
|
| RS232 |
5PIN/Pitch2.0mm,Baud Rate 2400 |
| Expansion Slot Communication Interface |
2×5PIN/Pitch2.54mm,Lithium Battery BMS Communication Card, WIFI Card, Dry Contact card, Etc. |
| Parallel Interface |
No Parallel |
With Parallel |
| Environmental Parameters |
|
| Operating Ambient Temperature |
0~40℃ |
| Operating Environment Humidity |
20%~95%(Non-Condensing) |
| Storage Temperature |
-15~60℃ |
| Altitude |
Altitude Should Not Exceed 1000m, Derating Above 1000m, Maximum 4000m, Refer to IEC62040 |
| Noise |
≤50db |
| PHYSICAL PARAMETERS |
|
| D×W×H(mm) |
110×300×450 |
| Weight (for Reference) |
7kg |
7kg |
7.8kg |
| STANDARDS |
EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 |
|
|
5KW Off-Grid Solar Inverter Solar System for Home Pure Sine Wave Output, with MPPT Controller, AC input Charger Images
|
